 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Specification No. Date 2002. 11.20 SPECIFICATIONS 5 Pure Green LED LAMP MODEL : ATPG- L53C Designed by Checked by Approved by ACROSENTEC MODEL : ATPG-L53C 1. Features 1-1. InGaN Pure Green Chip 1-2. 5mm all epoxy resin mold type 1-3. Colorless Cylinder type LED lamp 1-4. Ultra luminous intensity 2. Application 2-1. LED Display / Traffic Guiding signal 2-2. Illumination device 2-3. Back Light for Signboard 3. Dimension Description : *. 5mm, 30o Water clear type * Designed for Ultra high brightness Data subject to change. MODEL : ATPG-L53C 4. Absolute maximum ratings and Characteristics 4 - 1 Absolute maximum ratings Items Forward Current Pulse Forward Current *1 Power Dissipation Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature *2 Symbols IF IFP PD VR Topr Tstg TSOL Ratings 30 100 78 5 -30 ~ +85 -30 ~ +100 2605 Ta=25 Units mA mA mW Vr *1) Pulse Width = 100 sec, Duty 10% *2 ) 5sec at location 3.0mm away from the base of the epoxy bulb 4 - 2 Optical and Electrical Characteristics Item Forward Voltage Reverse Current Luminous Intensity Dominant Wavelength Spectral Linewidth Viewing Angle Symbol VF IR IV d 21/2 Condition IF=20[mA] VR=5[V] IF=20[mA] IF=20[mA] IF=20[mA] IF=20[mA] Min 4800 Typ 3.4 6000 525 26 30 Max 3.8 10 - Ta=25 Unit V mcd nm deg Data subject to change. MODEL : ATPG-L53C 6. Typical Electro-optical characteristics curve Lead Temperature vs. Relative Luminosity Relative Luminous Intensity[a.u.] Forward Voltage vs. Forward Current 100 1 Forward Current[mA] 0 20 40 60 80 100 10 0.1 -20 1 1.0 2.0 3.0 4.0 5.0 Lead Temperature[] Forward Voltage[V] Luminous Spectrum 1.2 1.0 Ambient Temperature vs. Forward Current 40 Relative Intensity[a.u.] 30 Forward Current[mA] 0.8 0.6 0.4 0.2 0.0 20 10 400 450 500 550 600 650 700 0 0 -20 0 20 40 60 80 Ambient Temperature[] 30 Spatial Distribution - 30 - 60 60 - 90 1 0.5 0 0.5 1 90 Data subject to change. MODEL : ATPG-L53C 7. Inspection Standards 7 - 1 In production line, 100% inspection for electro-optical characteristics should be done on following 3 items. - VF , IR , Iv 7 - 2 Outgoing inspection be done to the standards as below. - MIL-STD-104D, S-3, AQL 1.0% - Items: VF, IR, Iv, p 8. Packing Standards 8 - 1.Taping : Standard taping provided. Or user's request. 8 - 2 Bulk Packing : In one vinyl pack, 500 or 1,000 LEDs are inserted. Or user's request. 9. Caution on usage 9 - 1 Be careful never to exceed , even momentarily, the absolute maximum ratings specified in the data sheet. 9 - 2 ACROSENTEC will not be held responsible for any damage to the user that may result from accidents or any other reasons during operation of the user such as use in excess of the absolute maximum ratings, or not keeping the matters that demand special attention. 9 - 3 Store and use where there is no corrosive gas. 9 - 4 The bending or cutting of the lead should be done in room temperature and no force applied on the package. Data subject to change. Copyright 2003 AcrosenTec Co.,Ltd, (www.AcrosenTec.com) |
Price & Availability of ATPG-L53C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |